Comnet CWGE2FE8MSPOE Informacje Techniczne Pobierz pdf (Strona 136)

129

 AC Disconnect: Tick this checkbox to monitor the AC impedance on the port terminals

and removes power when the impedance rises above a certain value, for a certain

period (for details, see the IEEE 802.3af specification).

 Capacitive Detection: If the port and capacitive detection are enabled, the

capacitances state reads in the voltage result from the constant current. This is then

subtracted from the pre-capacitance voltage to get a charge rate. If this charge rate is

within the window of the PD signatures, the device is considered to be discovered.

 Start: Showing with a tick symbol, the system initializes and resets successfully.

 And then, click to carry into effect.

 Port: The index of PoE ports.

 Enable State: Check it to enable the PoE function to the port.

 Power Limit From: Check it to decide the power limit method.

 Classification: When this check box is ticked, the system will limit the power

supply to the powered device in accordance with the related class.

 Legacy: Check it to support the legacy power devices.

 Priority: Pull down the selection menu item to choose the priority of power supplying.

 Port Limit (<15400) mW: User can key in the power limit value that is under 15.4

Watts.

 Mode: Displays the operating mode of the port.

 Current (mA): Displays the operating current of the port.

 Voltage (V): Displays the operating voltage of the port.

 Power (mW): Displays the power consumption of the port.

 Determined Class: Displays the PD’s class.

 And then, click

to carry into effect.

1 2 ... 131 132 133 134 135 136 137 138 139 140 141 142 143

Brak uwag

Comnet CWGE2FE8MSPOE Informacje Techniczne Strona 136